SAM IS NOT FUNCTIONING PROPERLY

SAM IS NOT FUNCTIONING PROPERLY

When executing sam command if you receive the following error as shown below,

Error Code: 5000                                                

Wed Jan 23 07:00:33 2008 Entering SAM area "System Administration Manager (garnet2)".                             

ERROR An infrastructural error message for [error code 80054, location ../prod4/Roseville/intermed/arch_scan.C:721] was not found in the internal error table.                              

Location: arch_err_handler.C:256                                 

Error Code: 5000 

To resolve the above issue, execute the steps given below, but better consult before executing the steps.

Login to the server with sudo access and execute those commands.

1. #cd /etc/sam

2. #mv reg_da.db reg_da.db.old

3. #mv reg_files.db reg_files.db.old

4. #mv reg_tm.db reg_tm.db.old

5. #cp -p /usr/newconfig/etc/sam/reg* /etc/sam

6. Run command sam and check whether it is working fine or not.

Thanks...

Kiran Jadhav

**Let's Share our knowledge**