How to check disk/array status on HP physical server

How to check disk/array status on HP physical servers:

[root@redhat5]# hpacucli
HP Array Configuration Utility CLI 7.61-2.0
Detecting Controllers...Done.
Type "help" for a list of supported commands.
Type "exit" to close the console.

=> ctrl all show config

Smart Array 6400 in Slot 2    (sn: P57820R9SS70FO)

   array A (Parallel SCSI, Unused Space: 0 MB)

      logicaldrive 1 (273.5 GB, RAID 6 (ADG), OK)

      physicaldrive 1:0   (port 1:id 0 , Parallel SCSI, 146.8 GB, OK)
      physicaldrive 1:1   (port 1:id 1 , Parallel SCSI, 146.8 GB, OK)
      physicaldrive 1:2   (port 1:id 2 , Parallel SCSI, 146.8 GB, OK)
      physicaldrive 1:3   (port 1:id 3 , Parallel SCSI, 146.8 GB, OK)


Smart Array 6i in Slot 0      ()

   array A (Parallel SCSI, Unused Space: 0 MB)

      logicaldrive 1 (410.2 GB, RAID 5, OK)

      physicaldrive 1:2   (port 1:id 2 , Parallel SCSI, 146.8 GB, OK)
      physicaldrive 1:3   (port 1:id 3 , Parallel SCSI, 146.8 GB, OK)
      physicaldrive 2:0   (port 2:id 0 , Parallel SCSI, 146.8 GB, OK)
      physicaldrive 2:1   (port 2:id 1 , Parallel SCSI, 146.8 GB, OK)

#############################################

=> ctrl all show status

Smart Array 6400 in Slot 2
   Controller Status: OK
   Cache Status: OK
   Battery Status: OK

################################################

=> controller slot=2 logicaldrive all show

#################################################

=> controller slot=2 array A show

=> controller slot=2 array B show

##################################################

=> controller slot=2 physicaldrive all show

####################################################

How to generate HP Array Diagnostic Report (ADU Report) in Linux for OS:

# hpaducli -f OutputFileName.zip

Thanks...

Kiran Jadhav

**Let's Share our knowledge and keep visiting here**